
Wet underfloor heating in Rochdale, fitted and fixed by Paul
Paul Hanna fits wet underfloor heating in new and existing floors across Rochdale, Littleborough and the towns around them.
4.9out of 5
134 Google reviews“Paul came out to our boiler within an hour of calling…”
“Absolutely lovely team, father and son, professional, polite, tidy.”
“Save his number Great Plumbers are hard to find and Paul is one of them.”
Water pipes go under the floor and warm water from your boiler runs through them, so the heat comes up evenly across the room. Ring him on 07966 200813 to talk it through.

How water-based underfloor heating works
A wet underfloor heating system is a loop of plastic heating pipe laid across a room. Each loop runs back to a manifold, a set of valves that shares the water out between rooms and controls how much goes where. It's fed from your central heating, the same as your radiators, but it runs cooler, because the heat spreads out over the whole room instead of coming off one panel on the wall.
Each room or zone gets its own thermostat, so you can keep the bathroom warm without heating the spare room. The heat's even, so there are no cold spots by the window. There's no radiator taking up wall space, and a tiled kitchen floor isn't cold first thing in the morning.

Types of wet underfloor heating we fit
There are two kinds of wet system, and which one suits you depends on what's there now.
For a new screeded floor
If the floor's being laid new and screeded (finished with a layer of sand and cement), such as an extension, a new build or a renovation where the old floor's been dug out, the pipe is fixed down over the insulation, either stapled to a tacker panel or clipped into rails, then a layer of screed goes on top.
For an existing solid floor
This is the one for where screed isn't an option. If you want floor heating in a room without digging it up, a 15mm slim board goes straight onto the existing solid floor and the loops sit in channels in the board. Tiles can go directly on top using a flexible adhesive, so it suits a kitchen or a bathroom refit.
How underfloor heating is installed
Under a screed, edge strips and insulation boards go down first, so the heat goes up into the room and not into the walls or the ground. With the slim board, the subfloor has to be flat and swept clear first. Either way, the heating pipes are laid to a design for that room, with the spacing between runs worked out, and every loop is connected to the manifold, filled and tested before the screed or the tiles go down.
Paul is a heating engineer, so he lays the pipe, fits the manifold and connects it all to your heating himself. On a new floor, your builder lays the screed once the loops have been tested.

Underfloor heating with radiators
You don't have to choose between underfloor heating and radiators. Both can run off the same gas boiler. The underfloor circuit wants cooler water than a radiator, so a mixing valve blends it down to the right temperature before it goes into the floor.
If your boiler's due for replacing anyway, we can quote for both together, and boiler swaps start from £1,599. On an older system we may suggest a power flush first, so sludge from the radiators doesn't end up in the new loops.

Electric underfloor heating
Electric underfloor heating uses mats or cables under the floor instead of water pipes. It's cheaper to put in and suits small rooms like an ensuite, and it should be connected by a qualified electrician. Its running costs are higher than a wet system on gas, though, so for bigger rooms, such as a whole ground floor, a wet system usually works out cheaper. Paul fits wet systems.

Underfloor heating repairs
Paul fixes underfloor heating as well as fitting it. When a room stops warming up, the fault is often at the manifold, the pump or the controls, not under your feet, so finding it there means nothing needs lifting.
Andrew L: "Paul and Will resolved the issues with my underflooring heating system and installed new towel radiators."
If there's no heating anywhere in the house, start with our boiler repair page.
Paul does the work himself, usually with his son Will. Janette R said the two of them "completed complicated jobs efficiently and cleaned up afterwards." You can read more about us.

Underfloor heating questions
How much does underfloor heating installation cost?
Underfloor heating is priced per job. The price depends on the size of the room, which system suits it and whether the floor is being screeded anyway. We'll look at the room and give you a free quote. Klarna and Clearpay let you pay it off in interest-free instalments if you're 18 or over, subject to status. There's more on our finance page.
How long does it take?
We'll tell you how long when we quote. A screeded floor also needs time to dry before the floor coverings go down.
How deep does underfloor heating need to be?
The slim board is 15mm, so it adds very little to the floor height before the tile goes on. On a new floor, the depth of the whole floor build-up is set in the design, so it needs planning before the floor levels are fixed.
Do you need an electrician to install underfloor heating?
For an electric system, yes. A wet system is plumbing work: the pipework, the manifold and the connection to your heating. The thermostats and their wiring still need a power supply, and that part is electrical work.
Can I install underfloor heating myself?
Some people lay an electric mat themselves and get an electrician to connect it. With a wet system, the connection to your heating has to be done properly, and adding to a heating system can count as building work you have to notify under Building Regulations. Hanna Heating can notify it through the Gas Safe Register. A mistake buried in a new floor is expensive to put right.
What floor coverings work with underfloor heating?
Tile and stone pass heat through best. Most engineered wood, laminate and vinyl work if the maker says they're suitable for underfloor heating. Thick carpet with a heavy underlay slows the heat down, so check the tog rating before you buy.
Talk to us about underfloor heating
Ring Paul on 07966 200813 and tell him which room you're thinking of and what's down there now. Not in a rush? Send us the quote form and we'll call you back. We fit underfloor heating anywhere from Rochdale and Heywood up to Halifax, Burnley and Bacup. You can read what customers say on our reviews page.
Paul and WillWho comes to your house
Paul answers the phone and does the survey. Will works alongside him, and does the smaller plumbing jobs himself. Between them they have over 40 years' combined experience.
Most of our work comes by word of mouth and from customers we've worked for before.

Paul and Will, mid rip-out on a bathroom job
About Paul and WillEverything else we do
Free quotes, done in person. Klarna or Clearpay can spread the cost, interest-free.




Also boiler repairs, landlord certificates, power flushing, underfloor heating, plumbing and commercial heating.

